SB9600

From W3AXL Wiki
Jump to navigationJump to search

SB9600 is a Motorola proprietary TLL communications protocol. It uses a pair of inverted signal lines, BUS+ and BUS-, along with a BUSY (and complementary /BUSY) signal, to communicate between various components inside a radio, or between a radio and its control head.

Radios known to use SB9600 for control include:

Physical Layer

SB9600 signal diagram from the XTL2500 detailed service manual. Note that this diagram incorrectly shows the BUSY signal as active high. The original SB9600 specification document calls for BUSY to be active low and /BUSY (not present on the XTL2500) to be active high

The physical layer of SB9600 consists of complementary data and control lines. BUS+ & BUS- are bidirectional data lines and are complements of each other. BUS+ is active low and is essentially a standard UART line. BUS- is simply the inverse of BUS+. BUSY & /BUSY are bidirectional control lines used to avoid data collision and ensure only one device on the SB9600 bus is transmitting data at any given time.

SB9600 Signal Lines
Name Description Default State
BUS- Bidirectional differential data bus, active high Low (0V)
BUS+ Bidirectional differential data bus, active low High (5V)
/BUSY Bidirectional busy indicator, active high. Used for collision avoidance. Low (0V)
BUSY Bidirectional busy indicator, active low. Used for collision avoidance High (5V)