Micom 2ES

From W3AXL Wiki
Revision as of 14:23, 21 February 2024 by W3AXL (talk | contribs) (Created page with "== Hardware == === Headless Power-Up === To power up the Micom without a control head attached, you need to connect pin 14 (CTRL_ON_OFF) to ground (pin 7 or 13). You can use a standard 0.1" shorting jumper to connect 13 & 14 for a clean automatic power up. File:Micom Connector.png")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Hardware

Headless Power-Up

To power up the Micom without a control head attached, you need to connect pin 14 (CTRL_ON_OFF) to ground (pin 7 or 13). You can use a standard 0.1" shorting jumper to connect 13 & 14 for a clean automatic power up.

Retrieved from "https://wiki.w3axl.com/index.php?title=Micom_2ES&oldid=479"