Micom 2ES: Difference between revisions
From W3AXL Wiki
Jump to navigationJump to search
| Line 4: | Line 4: | ||
[[File:Micom Connector.png]] | [[File:Micom Connector.png]] | ||
=== Rear Accessory Connector === | |||
Serial communications with a PC use the TXA/RXA pins on the rear 44-pin connector, '''not''' TXD/RXD like you'd expect. RXA is pin 15 and TXA is pin 16. | |||
Revision as of 14:32, 21 February 2024
Hardware
Headless Power-Up
To power up the Micom without a control head attached, you need to connect pin 14 (CTRL_ON_OFF) to ground (pin 7 or 13) on the front control head connector. You can use a standard 0.1" shorting jumper to connect 13 & 14 for a clean automatic power up.
Rear Accessory Connector
Serial communications with a PC use the TXA/RXA pins on the rear 44-pin connector, not TXD/RXD like you'd expect. RXA is pin 15 and TXA is pin 16.
