Micom 2ES: Difference between revisions
From W3AXL Wiki
Jump to navigationJump to search
(Created page with "== Hardware == === Headless Power-Up === To power up the Micom without a control head attached, you need to connect pin 14 (CTRL_ON_OFF) to ground (pin 7 or 13). You can use a standard 0.1" shorting jumper to connect 13 & 14 for a clean automatic power up. File:Micom Connector.png") |
|||
| Line 1: | Line 1: | ||
== Hardware == | == Hardware == | ||
=== Headless Power-Up === | === Headless Power-Up === | ||
To power up the Micom without a control head attached, you need to connect pin 14 (CTRL_ON_OFF) to ground (pin 7 or 13). You can use a standard 0.1" shorting jumper to connect 13 & 14 for a clean automatic power up. | To power up the Micom without a control head attached, you need to connect pin 14 (CTRL_ON_OFF) to ground (pin 7 or 13) on the front control head connector. You can use a standard 0.1" shorting jumper to connect 13 & 14 for a clean automatic power up. | ||
[[File:Micom Connector.png]] | [[File:Micom Connector.png]] | ||
Revision as of 14:23, 21 February 2024
Hardware
Headless Power-Up
To power up the Micom without a control head attached, you need to connect pin 14 (CTRL_ON_OFF) to ground (pin 7 or 13) on the front control head connector. You can use a standard 0.1" shorting jumper to connect 13 & 14 for a clean automatic power up.
