NX5000 Mobiles: Difference between revisions
From W3AXL Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
[[File:NX5000_RJ45_USB.png]] | [[File:NX5000_RJ45_USB.png]] | ||
===Boot Loops=== | |||
If you encounter your NX5000-series mobile is bootlooping, try re-seating the ribbon cable that connects the brick to the head/interface board. This has been known to solve random boot loops in several separate cases. | |||
Revision as of 21:10, 14 December 2020
Hardware
DIY USB Programming Cable
The programming cable is super easy to DIY. You just need a spare USB cable and an RJ45 plug. Note that Kenwood, like Motorola, uses reverse pin numbering.
The view below is looking into the mic jack on the control head.
Boot Loops
If you encounter your NX5000-series mobile is bootlooping, try re-seating the ribbon cable that connects the brick to the head/interface board. This has been known to solve random boot loops in several separate cases.
